KTM Freeride E-XC 2019 - Overview of the KTM Powerpack Battery Charger; Positioning the Battery Charger

KTM POWERPACK, BATTERY CHARGER 17
109
17.3 Overview of the KTM PowerPack battery charger
402153-10
1
Residual current protection switch
2
"On" charger switch
3
"Off" charger switch
4
Battery charger
5
Charging mode switch
6
Charge level indicator
7
Status indicator
8
LED for KTM PowerPack fault
9
LED for charger fault
17.4 Positioning the battery charger
Warning
Risk of injury There is a risk of electric shock in a moist environment.
The battery charger is not waterproof.
– Only use the battery charger in dry conditions.
– Ensure that no fluids flow or drip onto the battery charger.
Warning
Risk of injury If the battery charger is used incorrectly, its intrinsic safety cannot be guaranteed.
The battery charger is only suitable for use with a KTM PowerPack.
– Only use the battery charger with a KTM PowerPack.
– Only operate the battery charger using household sockets with an earth conductor.
– Do not use any additional adapters or extensions.
– Follow the applicable safety instructions of the power connection.