KTM Freeride E-XC 2019 - Preparing for Use after Storage

STORAGE 22
127
22.2 Preparing for use after storage
Info
If the KTM PowerPack has not been used for more than six months, start by discharging the
KTM PowerPack until the vehicle switches off with blink code 11. Then recharge the KTM PowerPack
completely.
401059-01
– Remove the motorcycle from the lift stand. ( p. 57)
– Install the 12-V battery. ( p. 98)
– Install the KTM PowerPack. ( p. 108)
– Perform checks and maintenance measures when preparing for
use. ( p. 40)
– Take a test ride.