SERVICE WORK ON THE ENGINE 20
123
C00747-10
–
Fill special tool
3
with the specified quantity of gear oil.
Oil filler syringe (58429048000)
Gear oil 0.2 l (0.2 qt.) Gear oil (SAE
80W/90)
( p. 137)
– Fill the gear oil using the special tool.
– Wipe away any excess gear oil.
Info
The screw plug is not used for checking the oil level!
C00745-11
–
Mount and tighten screw plug
2
.
Guideline
Oil seal plug M10 8 Nm (5.9 lbf ft)
– Stand the motorcycle upright.
Finishing work
– Install the KTM PowerPack. ( p. 108)
– Lock the seat. ( p. 69)
– Go for a short test ride and check the motor has no leaks.
To Next Page
Loading...
