KUHN FC313RF - Page 17

4. - Safety
FC313RF
15
KN021BGB K
Mower conditioner
Stage 3:
Stage 4:
To measure:
- Total weight (t):
• Tractor + machine (transport position).
• Ballast weights.
Checking:
- To go to the next stage:
• Check in the tractor's operator's manual that the
value measured is below the tractor's Gross
Combined Weight Rating.
Example:
• (t) = 9220 kg (20325 lb)
• PTAC = 13000 kg .
• t < PTAC : Go to the next stage.
kgkg
t = _____kg
To measure:
- Load on rear axle (t2):
• Tractor + machine (transport position).
• Machine fully loaded.
• Ballast weights.
Checking:
- Check in the tractor's operator's manual that the
value measured is below the maximum allowed
tractor rear axle load.
- Check that tyre and rim specifiations are in
conformity with the requirements of the tractor
manufacturer.
Example:
• Load on rear axle (t2) = 3500 kg (7715 lb)
• Check in the tractor's operator's manual that the
value measured is below the maximum allowed
tractor rear axle load.
kgkg
t2 = _____kg
t2 > t2 maxt2 > t2 max
t2 t2 ≤ t2 max t2 max