FC313RF
60
8. - Instructions for work
KN021BGB K
Mower conditioner
8.3.2 Machine safety
In case of clogging:
- Lift and lock front hood.
- Remove foreign body.
- Check that the mowing unit has not been
damaged.
- Check rotating components for damage.
- Lower and lock front hood.
- Check the condition of the friction slip clutch.
Before carrying out any maintenance or
repairs on the machine, switch off the tractor
engine, remove ignition key, wait until all
moving parts have come to a standstill and
apply park brake.
In case an obstacle is struck:
- Check that the mowing unit has not been
damaged.
- Check spacer (1).
- Replace spacer if:
• The tube is bent.
• The paint is cracked.
The spacer is a safety part, it is forbidden to
reinforce it.
To Next Page
Loading...