6. - Putting into service
FC313RF
51
KN021BGB K
Mower conditioner
6.2.11 Uncoupling the machine
The machine is uncoupled.
From the transport position:
- Lower the transport lock lever in working position
(1).
- Lift the machine with the tractor's three point
linkage.
- Release and lower parking stands (2).
- Release and lower lateral parking stand (3).
- Remove check chains on tractor side.
- Disconnect the PTO shaft from the tractor.
- Remove "A" frame coupler lock pin.
- Disconnect and store electric plug in its holder.
- Lift the mowing unit using the machine's lift
cylinders to release transport locks.
- Lower the mowing unit using the machine lift
cylinders.
- Lower the tractor three-point linkage to rest the
machine on the ground.
- Remove the tensioner from the rear swath shield
cover.
- Open machine swath shields to avoid interferences
with the tractor's "A" frame coupler.
- Disconnect and place hydraulic hose coupler in its
support.
- Lower the tractor's front linkage and uncouple the
"A" frame coupler.
To Next Page
Loading...