FC313RF
54
8. - Instructions for work
KN021BGB K
Mower conditioner
8. Instructions for work
8.1 Putting the machine into work
position
From the transport position:
- Lower the tractor's lift linkage to tension the check
chains.
- Lower the transport lock lever in working position.
- Lower and lock side guards.
- Make sure all the guards are in place.
The machine is in working position.
Immediately replace any worn or damaged
guard.
- Lift the mowing unit using the machine's lift
cylinders to release transport locks.
- Activate machine lift cylinders to rest the machine
on the ground.
- Shift the mowing unit lift cylinder directional control
valve in float position.
During work, only use the mowing unit lift
cylinder to place the machine in headland
turn position.
To Next Page
Loading...