FC313RF
94
11. - Troubleshooting guide
KN021BGB K
Mower conditioner
11. Troubleshooting guide
-
Problem Cause Remedy
Uneven stubble.
Dull or broken knives. Replace knives.
Knives not installed
correctly.
Make sure the arrow on
the knife upper face is
pointing in the disc's
direction of rotation.
Too low PTO speed
(rotational frequency).
Increase speed to
1000 min
-1
.
Soil build up in front of the
cutterbar.
Too much cutterbar down
pressure.
Increase pressure in the
hydro-pneumatic
accumulators.
Adjust main frame height
with regards to the ground.
Very wet working
conditions.
Bad ground contour
adaptation.
Incorrect main frame
setting.
Adjust main frame height
with regards to the ground.
Excessive ground speed. Reduce groundspeed.
Insufficient ground
pressure.
Reduce pressure in the
hydro-pneumatic
accumulators.
To Next Page
Loading...