FC313RF
92
10. - Maintenance and storage
KN021BGB K
Mower conditioner
10.5 Storage
10.5.1 At the end of each season
- Clean the machine thoroughly.
- Drain all gearboxes and cutterbar and refill with
new oil (see "Lubrication" chapter).
- Touch up any areas of damaged paintwork.
- Put the machine under cover in a dry place.
- Inspect and replace worn knives and bolts
(see section "Inspection of knives and securing
elements").
- Slacken V-belts and check their condition.
- Depressurize all hydraulic functions.
- Grease the cylinder rods in contact with the
outside.
To Next Page
Loading...