7. - Instructions for transport
FC313RF
53
KN021BGB K
Mower conditioner
7.2 Conformity with the road
regulations
- Check that the light boards are clean and that the
lighting equipment functions before transporting
the machine on public roads.
- Before driving onto a main road, ensure that upper
edge of signalling panel is not more than
1.5 m (4’11’’) from the ground.
Before driving the machine on public roads,
ensure that the machine complies with
current highway code regulations.
Immediately replace any worn or damaged
signalling panels or lights.
Before driving onto a main road, employ a
person to give the driver indications to
manoeuvre safely:
• When leaving the farm.
• On emerging roads.
• At junctions.
Fit additional lights on the tractor if the
original ones are covered by the machine;
(see tractor dealer).
The additional lights must not be mistaken
for the working lights fitted on top of certain
tractors.
It is forbidden to use working lights as low-
beam headlights.
Only one pair of low-beam headlights can be
switched on at the same time.
To Next Page
Loading...