FC313RF
96
12. - Appendix
KN021BGB K
Mower conditioner
12. Appendix
12.1 Calculating the load on an axle
Define the total weight, axle loads, tyre
capacity and minimum additional mass:
When coupling a tool to the front and/or rear 3-point lift linkage, the maximum authorized
payload must not be exceeded.
When coupling tools to the front and/or rear 3-point lift linkages, the maximum load on tractor's
tires must not be exceeded
The load on the tractor front axle must always represent 20 % of the tractor unladen weight.
Prior to use, check that these conditions are satisfied by making this calculation or by weighing
the tractor-machine unit
The following values are required for the calculation:
M1
abcd
T
1
T2
M2
To Next Page
Loading...