KUHN FC313RF - Page 97

11. - Troubleshooting guide
FC313RF
95
KN021BGB K
Mower conditioner
Badly shaped windrows.
Too low PTO speed
(rotational frequency).
Increase speed to
1000 min
-1
.
Incorrect swath shield
adjustment.
Adjust swath shields.
Insufficient cutterbar
ground clearance in
"headland turn" position.
Incorrect tractor lift linkage
setting.
See machine attachment.
If the machine transport
locks do not engage
automatically.
The spacer is distorted. Replace spacer.
Considerable vibrations.
Checking the roller
parallelism and gap.
Adjust roller parallelism
using side stop screws.