10. - Maintenance and storage
FC313RF
75
KN021BGB K
Mower conditioner
10.4 Maintenance
10.4.1 Hydro-pneumatic accumulators
Coupling device a:
Before adjusting, maintaining or repairing
the machine, turn off ignition key and wait
until all moving parts have come to a
complete stop.
Before any work is carried out on a hydraulic
circuit with hydro-pneumatic accumulator,
depressurize the circuit.
It is strictly forbidden to weld, grind or drill
onto a hydro-pneumatic accumulator.
(a): For machines up to serial number B0265.
Hydro-pneumatic accumulators do not require any
particular maintenance.
- Regularly check the tightness of the accumulator
fixing bolts and that no oil has leaked from
hydraulic circuit (a small oil leak can change
settings).
a
To Next Page
Loading...