FC3160-3560-4060 TCD
22
4. - Safety
KN284EGB_A
Mower conditioner
4.2.15 Precautions for machine use
- After each use, check the cutting tools (discs,
knives) and their attachment hardware in
accordance with the instructions given in the
present manual. Immediately replace any worn,
damaged or missing cutting tool or element. To
do this, use the tool outfit supplied with the
machine. For your safety, only use genuine parts!
- Regularly check the condition of the protection
covers. Immediatly replace any worn, damaged
or missing cover. Before engaging the PTO, rest
the cutterbar on the ground. Make sure all the
guards are in place. Keep all persons and
animals away from the danger zone.
- Stay a safe distance from the machine when the
cutting tools are in movement.
- Never work in reverse.
- After disengaging the PTO drive, cuttings tools
can continue rotating for some time. Stay away
from the machine until all moving parts have
come to a complete standstill.
- If the machine hits an obstacle, disengage the
PTO drive, stop the tractor engine, remove the
ignition key and wait for all moving parts to come
to a complete standstill. Check the entire
machine for any damage before resuming work.
To Next Page
Loading...
