KUHN FC3160 TCD - Designated Use of the Machine; Technical Specifications; Designated Parameters

FC3160-3560-4060 TCD
36
5. - Machine specifications
KN284EGB_A
Mower conditioner
5.1.1 Designated use of the machine
The FC3160-FC3560-FC4060TCD mower conditioner must only be used for the work for which it has been
designed: mowing on the ground of hay fields, grass silage fields and improved pastures for the purpose of
harvesting fodder for feeding livestock.
From a safety point of view, the machine is not designed to mow road sides.
5.2 Technical specifications
FC3160TCD FC3560TCD FC4060TCD
Attachment type 2 point linkage category 2 and 3N
Number of discs 7 8 9
Working width 3.10 m (10’2’’) 3.50 m (11’6’’) 4.00 m (13’1’’)
Width in working position 5.22 m (17’2’’) 5.43 m (17’10’’) 5.75 m (18’10’’)
Height in working position 1.66 m (5’5’’) 1.66 m (5’5’’) 1.66 m (5’5’’)
Length in working position 5.71 m (18’9’’) 5.71 m (18’9’’) 6.27 m (20’7’’)
Width in transport position 3.00 m (9’10’’) 3.50 m (11’6’’) 4.02 m (13’2’’)
Height in transport position 1.78 m (5’10’’) 1.78 m (5’10’’) 1.78 m (5’10’’)
Length in transport position 6.74 m (22’1’’) 6.74 m (22’1’’) 7.29 m (23’11’’)
Disc rotational speed 2900/min
Rotor speed 780 and 1000/min
Rotor width 2.46 m (8’1’’) 2.87 m (9’5’’) 2.87 m (9’5’’)
PTO speed 1000/min
Weight 2390 kg (5269 lb) 2540 kg (5600 lb) 2680 kg (5908 lb)
Minimum PTO power requirement 55 kW (75 hp) 62 kW (84 hp) 69 kW (94 hp)
Swath width
From 0.90 m (2’11’’) to
2.3 m (7’7’’)
From 1.10 m (3’7’’) to
2.70 m (8’10’’)
From 1.10 m (3’7’’) to
2.70 m (8’10’’)
Tyres 400/60x15.5
5.2.1 Designated parameters
134013: Specific requirements for countries member of the Eurasian Economic Community (EAC marking).