KUHN FC3160 TCD - Adjustments

10. - Optional equipment
FC3160-3560-4060 TCD
71
KN284EGB_A
Mower conditioner
10.5.1 Adjustments
 Raised skid shoes
The skid shoes can be adjusted to 2 positions:
Low position:
- Loosen screw (1).
- Pivot lever (2) downwards.
- Raise skid shoe (3).
- Tighten screw (1).
- Adjust both sides to the same setting.
High position:
- Loosen screw (1).
- Pivot lever (2) upwards and insert hooks on pin (3).
- Tighten screw (1).
- Adjust both sides to the same setting.

Cutting height
- Place the machine on flat ground.
Adjustment must be made with the machine
coupled, hitch pins at 650 mm (26’’) from the
ground.
Cutting height is always adjusted before
adjusting the ground pressure.
1
2
3
1
2
3