6. - Putting into service
FC3160-3560-4060 TCD
39
KN284EGB_A
Mower conditioner
6.2 Coupling and uncoupling
6.2.1 Description of coupling elements
• A PTO shaft 1 3/8’’ - 6 splines.
• 2 check chains (Supplied according to
certification).
• A hose that controls the mowing unit
raising/lowering.
• Two hydraulic hoses controlling the drawbar shift
cylinder.
• A 7-pin electric plug for the electrical signalling
equipment.
6.2.2 Prevention against unauthorised use
For machines with European approval
To avoid non-authorized use of the machine, the
spacer (1) must be placed on the hitch pin and the
padlock (2) must be locked in the pin hole.
6.2.3 Preparing the tractor
The machine adapts to tractors fitted with a 3-point
hitch coupler category 2 or 3N.
The tractor must be fitted with lower link
stabilizers.
To Next Page
