FC3160-3560-4060 TCD
40
6. - Putting into service
KN284EGB_A
Mower conditioner
The tractor PTO must rotate at a speed of 1000 min-1.
The tractor must be equipped with:
• 1 double acting hydraulic outlet.
• 1 single acting hydraulic outlet
Hitch pin parallelism
- Adjust tractor lift rods so that hitch pins are
parallel to the ground.
6.2.4 Coupling the machine
- Before hitching your machine, verify that
the coupling pins, the drawbar couplings or
the ball joints do not show any signs of
wear or fractures.
- Immediately replace worn or damaged
parts with original manufacturer parts.
To Next Page
