KUHN FC3160 TCD - Cleaning the Machine

11. - Maintenance and storage
FC3160-3560-4060 TCD
75
KN284EGB_A
Mower conditioner
• Drawbar shift
cylinder.

Maintenance
Check:
• Check oil levels.

• Check that all
hoses are in good
condition. (*)

• Replace the
hydraulic hoses.

(*): Replacement hoses must meet the manufacturer's technical specifications.
11.2 Cleaning the machine
- To prevent premature bearing housing
wear, remove foreign bodies wrapped
around them.
- If using a high pressure cleaner, do not aim
the jet at the cylinder seals, hoses,
bearings or electrical components
After the first
30 hours of use
Every 20 hours
1 time per month
during the season
(minimum)
Every 250 hours
or at the end of
the season
Every 500 hours
or at the end of
the season
Every 200 hours
or once a year
Every 5 years