KUHN FC3160 TCD - Putting into Service; Description of Control Elements

FC3160-3560-4060 TCD
38
6. - Putting into service
KN284EGB_A
Mower conditioner
6. Putting into service
6.1 Description of control elements
- The machine is supplied with a 13 mm spanner
(1) for unlocking the greasing covers.
- The machine is supplied with an 18 mm box
wrench (2) to carry out certain adjustment and
maintenance tasks.
- The machine is supplied with a 30 mm wrench (3)
to adjust the ground pressure.
- The machine is supplied with a tool for replacing
the knives (1).
1
2
3
1