FC3160-3560-4060 TCD
66
8. - Instructions for work
KN284EGB_A
Mower conditioner
8.3 Machine use
- Before mowing and to reduce risks of
projections, lower side guards and front
guards. Check guard locking.
- Check that latches (1) are attached.
- Check that nobody is within the machine
pivoting area.
- If there is someone, make sure the person
moves away.
Before the machine engages the crop:
- Engage the tractor PTO drive and accelerate
progressively up to the desired PTO speed.
The machine is lifted from working position into
headland turn position by means of the mowing
unit lift cylinders.
8.3.1 Drive speed
- Adapt the forward speed to the working
conditions.
To Next Page
