KUHN FC3160 TCD - Conditioning Intensity

8. - Instructions for work
FC3160-3560-4060 TCD
59
KN284EGB_A
Mower conditioner
To change the speed, use lever (1):
- Select the hare position to obtain a rotor speed of
1000 min-1.
- Select the tortoise position to obtain a rotor speed
of 780 min-1.
- Slightly rotate the discs by hand to facilitate the
gear engagement.
8.2.4 Conditioning intensity
Before adjusting, maintaining or repairing
the machine, turn off ignition key and wait
until all moving parts have come to a
complete stop.
Several factors govern the conditioning intensity
adjustment:

Conditioning rotor speed
- See section "Finger conditioning rotor speed".
1