KUHN FC3160 TCD - Intermediate PTO Shaft

6. - Putting into service
FC3160-3560-4060 TCD
45
KN284EGB_A
Mower conditioner
- On machine side, attach PTO shaft guard chain
to the gear box guard fastener (1).
- Immediately replace any worn or damaged
guard.
- Do not attach the drive guard chain to the
guard cone.
6.2.9 Intermediate PTO shaft
- Before adjusting, maintaining or repairing
the machine, turn off ignition key and wait
until all moving parts have come to a
complete stop.

Friction slip clutch
The secondary PTO transmission shaft is fitted with
a friction slip clutch.
1