KUHN FC3160 TCD - Draining

FC3160-3560-4060 TCD
82
11. - Maintenance and storage
KN284EGB_A
Mower conditioner
11.3.3 Draining
 Cutterbar
The cutter bar is lubricated for life and does not
require regular maintenance.
If in doubt as to the oil quantity contained in
the cutterbar, fully drain and refill cutterbar
respecting recommended oil quantity and
quality.
- Following all service operations or in case
of an oil leak, empty and refill cutterbar.
- Before draining oil, operate the machine for a
few minutes so that the oil warms up.
FC3160TCD FC3560TCD FC4060TCD
Type of oil Synthetic oïl for mechanical drives
Oil volume 3.5-L (0.92 US gal) 4-L (1.06 US gal) 4.5-L (1.19 US gal)
Viscosity 75W90
Specification API-GL5 (extreme pressure)