8. - Instructions for work
FC3160-3560-4060 TCD
55
KN284EGB_A
Mower conditioner
- Pull on handles (1) to unlock the side guards.
- Lower and lock side guards.
The machine is in working position.
8.2 Adjustments in working position
Before making any adjustment:
- Check that nobody is within the machine
pivoting area.
- If there is someone, make sure the person
moves away.
- Wait until the rotating parts have come to a
complete stop.
8.2.1 Cutting height
- Place the machine on flat ground.
Adjustment must be made with the machine
coupled, hitch pins at 650 mm (26’’) from the
ground.
Cutting height is always adjusted before
adjusting the ground pressure.
To Next Page
Loading...
