KUHN FC3160 TCD - Lubrication; PTO Shafts

11. - Maintenance and storage
FC3160-3560-4060 TCD
77
KN284EGB_A
Mower conditioner
11.3 Lubrication
- Before leaving the tractor or before
adjusting, maintaining or repairing the
machine, disengage the PTO drive, turn off
the engine, remove ignition key and wait
until all moving parts have come to a
complete stop and apply park brake.
- Place the machine in working position.
The pictorials show the points to be greased.
- Clean grease nipples before greasing.
- Lubricate with multi-purpose grease grade
NLGI 2
11.3.1 PTO shafts
Before first use:
- Grease the transmission.
- In intensive use, it is recommended to
proceed with greasing at closer intervals.