KUHN FC3160TCD - Putting into Service; Control Elements and Tools

6. - Putting into service
FC3160TCD-3560TCD-4060TCD
33
KN284DGB B
Mower conditioner
6. Putting into service
6.1 Description of control elements
- The machine is supplied with a 13 mm spanner
(1) for unlocking the greasing covers.
- The machine is supplied with an 18 mm box
wrench (2) to carry out certain adjustment and
maintenance tasks.
- The machine is supplied with a 30 mm wrench (3)
to adjust the ground pressure.
1
2
3
- The machine is supplied with a tool for replacing
the knives (1).
1