KUHN FC3160TCD - Instructions for Work; Putting Machine into Work Position

8. - Instructions for work
FC3160TCD-3560TCD-4060TCD
49
KN284DGB B
Mower conditioner
8. Instructions for work
8.1 Putting the machine into work
position
From the transport position:
- Lower the mowing unit using the machine lift
cylinders.
Before placing the machine in working
position:
- Check that nobody is within the
machine pivoting area.
- If there is someone, make sure the
person moves away.
- Open drawbar shift cylinder lock valve.
- Open the mowing unit lift cylinder lock valves.
- Activate the transport/work cylinder control valve
in the "pivot into work" position.
Wait until cylinder is fully extended.