KUHN FC3160TCD - Lubrication and Greasing

11. - Maintenance and storage
FC3160TCD-3560TCD-4060TCD
77
KN284DGB B
Mower conditioner
11.3 Lubrication
- Clean grease nipples before greasing.
11.3.1 PTO shafts
Lubricate with multi-purpose grease grade
NLGI 2
 Primary PTO shaft (a)
- Every 50 hours:
• universal joints (1).
• transmission tube (2).
• Guide rings (3).

Universal joint assembly (b)
- Every 50 hours:
• universal joints (1).

Intermediate PTO shaft 1 (c)
- Every 20 hours:
• universal joints (1).
• transmission tube (2).
• Guide rings (3).

Intermediate PTO shaft 2 (d)
- Every 20 hours:
• universal joints (1).
• transmission tube (2).
• Guide rings (3).