FC3160TCD-3560TCD-4060TCD
56
8. - Instructions for work
KN284DGB B
Mower conditioner
8.2.4 Conditioning intensity
Several factors govern the conditioning intensity
adjustment:
Conditioning rotor speed
See section "Finger conditioning rotor speed".
Adjustment lever(1)
Before adjusting, maintaining or repairing
the machine, turn off ignition key and wait
until all moving parts have come to a
complete stop.
The lever sets the conditioning hood in relation to
the rotor in 5 positions.
- To increase the conditioning intensity, reduce the
distance between the conditioning hood and the
conditioning rotor.
- To reduce the conditioning intensity (for mowing
leguminous for example), increase the distance
between the conditioning hood and the
conditioning rotor.
Refer to the pictorial applied on the machine to
check the lever direction of operation with
regards to the required conditioning intensity.
If the leaves are damaged and the stalks are
crushed, reduce the conditioning intensity.
To Next Page
Loading...
