KUHN FC3160TCD - Finger Conditioning Rotor Speed

8. - Instructions for work
FC3160TCD-3560TCD-4060TCD
55
KN284DGB B
Mower conditioner
8.2.3 Finger conditioning rotor speed
The machine is equipped with a finger conditioning
rotor. The rotor speed can be set at 780 min
-1
or
1000 min
-1
. The machine is factory set at a rotor
speed of 1000 min
-1
.

Rotor speed adjustment
Always place the machine in working
position before making rotor speed
(rotational frequency) adjustments.
Turn off the engine, remove ignition key and
wait until all moving parts have come to a
complete stop.
- To change the speed, use lever (1):
• Select the rabbit position to obtain a rotor speed
of 1000 min
-1
.
• Select the turtle position to obtain a rotor speed
of 780 min
-1
.
1
Slightly rotate the discs by hand to facilitate the
gear engagement.