7. - Instructions for transport
FC3160TCD-3560TCD-4060TCD
45
KN284DGB B
Mower conditioner
7. Instructions for transport
7.1 Transport position
The machine is in transport position when the
following instructions have been respected:
• The mowing unit is raised.
• The lift cylinder valves are shut.
• The drawbar is in central position.
• The drawbar shift cylinder valve is shut.
• The side guards are raised.
Before placing the machine into transport
position:
- Wait until the rotating parts have
come to a complete stop.
- Check that nobody is within the
machine pivoting area.
- If there is someone, make sure the
person moves away.
Never engage the tractor PTO drive when the
machine is in transport position.
To Next Page
Loading...
