FC3160TCD-3560TCD-4060TCD
82
11. - Maintenance and storage
KN284DGB B
Mower conditioner
From the transport position:
- Unlock and raise side guards.
- Using two wedges of different height, rest the
cutterbar higher on opposite side of drain plug.
- Remove skid shoe (1).
- Place a container of sufficient capacity under
drain plug.
- Remove filler plug (2) and its washer.
- Remove drain plug (3) and its washer.
- Allow oil to drain completely.
- Wait for dripping to stop.
- Clean and reinstall drain plug (3) and its
washer. Replace if necessary.
- Pour the correct oil quantity and quality through
the opening of the filler plug.
- Clean and reinstall filler plug (2) and its
washer. Replace if necessary.
- Reinstall skid shoe (1).
- Lower and lock side guards.
To Next Page
Loading...
