Kuka VisionTech 2.1 User Manual

84 / 109 Issued: 11.10.2013 Version: KST VisionTech 2.1 V1
KUKA.VisionTech 2.1
Model for task {Task name}
could not be created: {Error
message}
It was not possible to detect
features in the images
because the lighting was too
strong or too weak.
Set the lighting lower or
higher.
Too few features were
detected in the images
because each camera
detected different features.
Align the cameras so that
each camera can detect the
same features.
No object could be detected
because the object was not in
the field of vision of the cam-
eras.
Align the cameras so that the
object is in the field of vision.
The following error occurred
while creating the reference
model for task {Task name}:
{Error message}
It was not possible to detect
features in the images
because the lighting was too
strong or too weak.
Set the lighting lower or
higher.
Too few features were
detected in the images
because each camera
detected different features.
Align the cameras so that
each camera can detect the
same features.
No object could be detected
because the object was not in
the field of vision of the cam-
eras.
Align the cameras so that the
object is in the field of vision.
The following error occurred
while loading the task: {Error
message}
The task is not compatible
with this version of Vision-
Tech.
Only use compatible tasks.
The task does not have the
TASK file format.
Only use files with the TASK
format.
The sensor {Serial number}
has no connection
The camera is not connected
to the robot controller.
Establish the connection and
restart the controller.
The camera is performing a
different process.
Terminate the process and
restart the controller.
The maximum number of cap-
tured images has been
reached. It is not possible to
add further images
The maximum number of
images has already been
taken.
Start calibration or terminate
the calibration process.
Failed to calculate the position
of the object
It was not possible to detect
features in the images
because the lighting was too
strong or too weak.
Set the lighting lower or
higher.
Too few features were
detected in the images
because each camera
detected different features.
Align the cameras so that
each camera can detect the
same features.
No object could be detected
because the object was not in
the field of vision of the cam-
eras.
Align the cameras so that the
object is in the field of vision.
Message Cause Remedy

Kuka VisionTech 2.1 Specifications

General

Brand	Kuka
Model	VisionTech 2.1
Category	Robotics
Language	English