Kurzweil K2700 - Software Updates

Getting Started
Software Updates
1-2
Keyboard and Controllers
e K2700 has an 88-key fully-weighted hammer action keyboard that provides you with a
piano-like feel. e array of physical controllers includes:
• 9 assignable sliders
• 9 assignable knobs
• 10 assignable buttons
• 16 assignable velocity sensitive pads
• Pitch Wheel and assignable Modulation Wheel
• Tap tempo button and tempo knob
• 2 Transpose buttons
• Monopressure (Aftertouch)
• Assignable ribbon controller
• 2 assignable switch pedal jacks (supports up to 4 switch pedals with 2 pedals per jack)
• 2 assignable CC pedal jacks
Pedals (Optional)
e K2700 has four jacks on the rear panel for optional pedal controllers.
Two switch pedal jacks are typically used to control two-state (i.e., on / o) parameters such
as sustain, sostenuto, and soft pedal. A Half Damper pedal (also known as a continuous
switch pedal) can be used to allow for “half pedaling” sustain techniques when playing
K2700 piano programs. Each jack also supports dual switch pedals, allowing up to 4 switch
pedals to be used.
Two continuous control (or CC) pedal jacks are typically used to control continuous
parameters such as volume and wah.
Your Kurzweil dealer stocks the following pedals:
• KP-1 Single piano-style switch pedal
• KP-1H Single piano-style Half Damper pedal
• CC-1 Continuous pedal
Software Updates
Be sure to check the Kurzweil website at www.kurzweil.com for new sounds, documentation
and software updates. See the Info page in Global mode to check the currently installed OS
version.