Kurzweil K2700 - The Effects Chain Editor

The Effects Chain Editor
4-1
Chapter 4
The Effects Chain Editor
When in Program Edit Mode on the FX page, pressing the EDIT button while a Chain
(other than 0 None) is highlighted—on any of the various eects pages—will call up the
Chain editor.
You may edit Eects Chains containing up to 16 eects boxes using up to 32 units of DSP
(digital signal processing) FX resources. Choose from 18 types of eects boxes, including
hundreds of eects box algorithms and presets. Create custom controller assignments and
apply modulation with LFOs, ASRs and mathematical functions.
From the Program editor, the program’s Insert and Aux Chains can be edited from the FX
and LYR FX pages. In Multi Edit Mode, Chains selected for Aux overrides can be edited
from the FX page.
A Chain is made up of one or more eect-boxes, with each box containing a single eect.
You can have up to 16 eect-boxes in a Chain. e settings for all of the parameters of
each eect-box are also stored within the Chain. ere are 30 Mod Controls that allow for
real-time control over any parameter from any eect-box in the Chain. Per Chain Control
sources are also provided to be used as inputs to the eect Mods (two FXLFOs, two FXASRs,
and four FXFUNs). ese work similarly to the LFOs, ASRs and FUNs in Program mode,
but are only available for use with the eect Mods.