Kurzweil K2700 - Editing Samples

Keymap and Sample Editing
Editing Samples
5-10
Editing Samples
To enter the Sample Editor, rst select the program you wish to edit in Program mode.
With the program selected, press the EDIT soft button to enter the Program Editor. In the
program editor the Keymap page will be selected (if not press the Keymap soft button). With
the Keymap parameter selected on the Keymap page, press the EDIT button again to enter
the Keymap Editor. On the Edit Keymap page, select the Key Range parameter and use the
Alpha Wheel or Previous-/Next+ buttons to choose one of the available key ranges (if there
is more than one Key Range). You can edit the existing sample of a Key Range, or choose a
new sample for the Key Range and edit that. When the Keymap parameter is selected you
can hold the ENTER button and trigger notes to select dierent key ranges.
If you want to select a dierent sample, use the cursor buttons to select the Sample
parameter. Use the Alpha Wheel to select a sample. Press the EDIT button once more,
and you’ll enter the Sample Editor. e sample will play through the eects of the current
program. e name of stereo samples end with an S. To use a stereo sample, the Stereo
parameter must be set to On in the Program Editor, and two Keymaps must be selected, see
The KEYMAP Page on page 3-44.