Kurzweil K2700 - FM Layer Page

Program Edit Mode
FM Layer Page
3-96
Freq MinDpt
Use the Freq MinDpt parameter to set the minimum modulation depth of Freq Source 2.
When a Freq DepthCtl control source is at its minimum value, Freq Source 2 will apply the
amount of modulation set by the Freq MinDpt parameter.
Freq MaxDpt
Use the Freq MaxDpt parameter to set the maximum modulation depth of Freq Source 2.
When a Freq DepthCtl control source is at its maximum value, Freq Source 2 will apply the
amount of modulation set by the Freq MaxDpt parameter.
FM Layer Page
Transpose
Use the Transpose parameter to adjust tuning in semitones for all Operators in the layer.
Detune
Use the Detune parameter to adjust ne tuning for all Operators in the layer. is is useful
for creating a chorus eect by applying dierent Detune values to multiple FM layers which
are set to the same settings.