Kurzweil K2700 - The PARAMS Page

Program Edit Mode
The PARAMS Page
3-6
The PARAMS Page
e PARAMS page shows all Program and FX parameters for the current program that have
been assigned to be controlled by the K2700’s physical controllers, or by MIDI CCs from an
external MIDI device.
Use the PARAMS page to change controller and MIDI CC assignments, set an initial
MIDI value for each controller assignment, and edit the name displayed for each controller
assignment.
When controller or MIDI assignments are made on other Program or FX Edit pages, or
if an FX Chain is selected which contains controller assignments, these parameters are
automatically added to the Parameters page.
Parameter Column
e Parameter column shows all Program and FX parameters for the current program that
have been assigned to be controlled by the K2700’s physical controllers, or by MIDI CCs
from an external MIDI device.
Eect Chain parameters are named with prexes based on their eect type: “INS” for
parameters from Insert eects, “LFX” for parameters from layer eects, and “AUX1” or
“AUX2” for parameters from Aux eects.
To quickly nd a parameter that is already assigned to a controller, select the parameter
column, hold the ENTER button and move a controller to select the assigned parameter.