Kurzweil K2700 - The Display

Program Mode
The Display
2-3
The Display
In Program Mode, the top line of the Display shows the current Mode, MIDI transposition,
MIDI In/Out activity indicators, and MIDI channel. If Quick Access view is selected, the
current Quick Access Bank number will be shown instead of the current MIDI channel.
e currently selected Program ID number and name are shown in the center of the Display.
If the selected program is a user program, a KB3 organ program, or if the program contains
an FM layer or FM operator function, the USER, KB3, FM or FMOP icons are displayed
next to the program name.
VIEW Soft Button and Quick Access View
Press the VIEW soft button to switch between the default Large view, List view, and Quick
Access view. In all views, the state of the KEYPAD button determines whether Programs
browsed by using the ALPHA WHEEL or PREVIOUS/NEXT buttons are ordered based on
Category order then ID number (KEYPAD o), or based on ID number only and ignoring
Category (KEYPAD on). When the USER button is on, only User Programs can be browsed
by using the ALPHA WHEEL or PREVIOUS/NEXT buttons, ordered based on Category
order then ID number.
Quick Access view shows the names of 10 favorite Programs and/or Multis, which can be
selected by pressing the corresponding numbers on the Keypad. To access more than 10
Programs/Multis, use the CHANNEL/LAYER/ZONE/TRACK buttons to select a dierent
Quick Access Bank. Programs or Multis which are not stored in a Quick Access Bank can be
browsed by using the ALPHA WHEEL or PREVIOUS/NEXT buttons.
When Quick Access view is selected, press and hold one of the Keypad buttons (0 through 9)
to store the currently selected Program or Multi to a spot in the current Quick Access Bank.
For details on Quick Access view, see “Display” on page 9-2.
Note: When Quick Access view is selected, the CATEGORY buttons always select an entry
in the current Quick Access bank, despite the state of the KEYPAD button. To type an ID
number when the KEYPAD button is on, you must press the VIEW soft button and select
Large or List view.