Kurzweil K2700 - KB3 Editor: the LFO+ Page; KB3 Editor: the ARP Page; KB3 Editor: the CC SEQ Page

Program Edit Mode
KB3 Editor: The LFO+ Page
3-124
Note Release
is parameter controls the release characteristic of notes. A setting of Normal has a
smoothed release, while a setting of Hard has an instant release. Hard will produce an
audible click.
Key and Key Track Amount
Key Track Amount can be used to scale the key click volume, so that lower notes will have
a quieter key click. e Key parameter determines the key at which the volume scaling will
begin. (When the Key parameter is selected, you can select the desired key by holding the
ENTER button and striking a key.)
e selected key will use the key click volume set by the Volume parameter. Each key below
the selected key will have progressively quieter key click. For example, with Key Track
Amount set to -5.0%/key, the note 1 key below the selected Key will be have it’s keyclick
volume lowered by 5%, the note 2 keys below the selected Key will have it’s key click Volume
lowered by 10%, and so forth.
KB3 Editor: The LFO+ Page
is page is the same as the VAST Program editor LFO+ page (see: The LFO+ Page on page
3-71).
KB3 Editor: The ARP Page
is page is the same as the VAST Program editor Arpeggiator page (see: The Arpeggiator
(ARP) Page on page 3-25).
KB3 Editor: The CC SEQ Page
is page is the same as the VAST Program editor CC Sequencer page (see: The CC
Sequencer (CC SEQ) Page on page 3-39).