Program Mode
Save User Programs
2-11
Once you have saved your Split or Layer, you can continue to add Zones to the Multi with
the Split or Layer functions until you reach the maximum number of active Zones. You can
also use Multi Edit Mode to edit controller assignments (like eects controls and sustain
pedal per Zone), transposition per Zone, and other Multi parameters. For details see Ch.
7 Multi Edit Mode.
Save User Programs
If you make changes to the current Program using any of the controllers, the Save button’s
LED lights to indicate that a change has been made to that Program.
To save a copy of the Program with the changes you’ve made, press the Save button once to
view the Save Dialog. e Save Dialog allows you to choose an ID number to that will be
associated with the program you are saving. When viewing the Save Dialog, you can quickly
save the Program to the displayed ID number by pressing the Save button again.
Changing ID Numbers
e Display shows the rst available ID number and the current Program name. User
Programs can be saved to ID numbers from 4096 to 8191.
If you are saving a Program that has not been previously edited, the next available unused ID
number will be selected.
If you are saving a previously edited User Program, the ID number that the Program was last
saved with will be selected.
Press the Previous and Next buttons simultaneously to toggle between selecting the ID
number that the Program was last saved with and the next available unused ID number.
To Next Page
Loading...
