Kurzweil K2700 - Page 40

Program Mode
Save User Programs
2-12
To change the ID number, turn the Alpha Wheel or use the Previous/Next buttons to select
the new ID number. e label underneath indicates if it is an “Unused ID”. You can also use
the keypad function of the Category buttons to type an ID number, followed by pressing the
Enter button
If you select an ID currently in use, the Display will notify you that by saving you will
“replace” the Program currently in that location. Conrm overwriting of the existing
Program by pressing Save, or choose a dierent ID.
Naming a User Program
To rename the Program, rst press the RENAME soft button. e Display shows the current
Program name.
Use the Category buttons, Alpha Wheel or Previous/Next buttons to change each character.
Use the Left/Right cursor buttons or <<< >>> soft buttons to move the cursor.
Press the +/- button to switch between upper and lower case characters.
Use the Insert button to insert a blank space. e selected character and all characters to the
right will move one space to the right.
Use the Delete button to delete the current character (all the characters to the right will move
one space to the left).