Kurzweil K2700 - Page 296

Song Mode
The TRACK Page
8-25
Value Range
e left and right Value Range elds respectively determine the lowest and highest values in a
range of MIDI Continuous Controller (CC) values that will be aected by the selected Track
Function.
Soft Buttons on the TRACK Page
FROM TO is a quick way to dene the region of time you intend to edit. ere are a couple
of ways to use this feature while a song is playing, and both ways will set the boundaries of
the region.
One way is to select the From parameter and then press the Play button. During playback,
every time you press FROM TO, the K2700 updates the value of From with the current
playback location. Select the To parameter to change the value of To in a similar fashion.
If you haven’t selected either the From or To parameter, pressing FROM TO during playback
updates From or To—or both—depending on the current playback location (the value of the
Locate parameter) at the time you press FROM TO. If you press it while the Locate value
is earlier in the song than the current To value, the K2700 updates the From value. If you
press FROM TO again (without stopping playback) while the Locate value is later than the
current From value, the K2700 updates the To value.
GO performs the selected Function.
DONE will return you to the Song Mode Main page.
Track Functions
Erase
is function erases specied events from a region of time, but it doesn’t delete the region of
time. e result is like erasing a section of recording tape. If you want to completely remove
a segment and shorten the length of the track, you can do it with the Delete function.