KWB Easyfire User Manual

4
Only use the extendable handle (option) when you pullthe ash container!
To do this, pull the handle out completely (2) until it engages.
4
To lift the ash container, move the extendable handle (option) to the first position (1) until it
engages and grab under the ash container using both hands.
4
To empty, open both upper fasteners and remove the cover.
4
After you have emptied the ash container, ensure that the cover seals tightly again!
Attaching the ash container again
4
Open the damper on the rear side.
4
Slide the ash container onto the system: The system detects the fitted ash container,
switches on again and switches to the last active operating state.
4
Secure the two lower fasteners!
4
Close both swing doors on the boiler.
1
2
5.2.3
Regular tasks
5
Ash container
B KWB Easyfire EN, 05.2011
21

KWB Easyfire Specifications

General

Fuel Type	Wood pellets
Cleaning System	Automatic heat exchanger cleaning
Emission Class	5
Nominal Heat Output	10 kW
Type	Pellet heating system
Ash Removal	Automatic
Heating capacity	10 kW
Hopper capacity	15 kg
Flue diameter	130 mm