The commands of the KWB Comfort 3 control
The following describes the functions of the menus and options of the KWB Comfort 3 menu
tree. If you are unsure about the application of a function, please ask your heating technology
partner or KWB customer service first before you change any values!
Overview
Which functions are found in which menu?
(depending on boiler and user level)
Menu Description of the function(s)
System on/off Switch the boiler on/off
Room temperature Specify room temperature
Party operation Extend heating time until end of party
Heating circuits Set heating circuits
Boiler Set DHWC
Buffer Set buffer tank
Operational state See the operating state of all components
Date / Time: Change date and time
Fuel factor Adapt the system to the quality of the pellets
Pellet suction system Specify allowed times for suction conveyor (if present)
Customer service Call up customer service information
Alarms Display alarms and rectify
Boiler program Configure additional switch-on times
Extensions Configure options Comfort SMS, Visio and InterCom
Expert level Enable specialist levels via access codes
System on/off
Main menu >> System On/Off
Boiler status
On: Boiler is switched on and reacts to heat requests
Off: Boiler is switched off
Boiler output
Display of the current allowed power (nominal output) in percent.
See also
2
Operational state [➙
30]
6
6.1
6.2
6
The commands of the KWB Comfort 3 control
22
B KWB Easyfire EN, 05.2011
To Next Page
Loading...
Need help?
General
