Tip: Activate this program if hot water should be available at any time.
Off
The boiler charge function
is switched off.
Setting for longer periods of inactivity.
Manual mode
The temperature of the hot water is always kept at the maximum temperature (while it is
switched off in the temperature program after reaching the maximum temperature and it will
only be charged again undershooting the minimum temperature of the hot water)!
The DHWC charge pump also runs automatically in manual mode (boiler mode).
(1) Main menu >> Boiler >> Boiler No. >> Charging times [► 27]
(2) Main menu >> Boiler >> Boiler No. >> Boiler temperature [► 27]
Charging times
Main menu >> Boiler >> Boiler No. >> Charging times
Determine when each DHWC is to be heated up. You can specify the charging times for each
individual day or for all days together.
If you would not like to use a time period, set the values for On and Off to the same time: The
KWB Comfort 3 will then detect this time period as an empty entry
.
Heating times in the boiler program
Charging time From To From To
Monday 16:00 20:00 20:00 20:00
Tuesday 16:00 20:00 20:00 20:00
Wednesday 16:00 20:00 20:00 20:00
Thursday 16:00 20:00 20:00 20:00
Friday 16:00 20:00 20:00 20:00
Saturday 16:00 20:00 20:00 20:00
Sunday 16:00 20:00 20:00 20:00
DHWC temperature
Main menu >> Boiler >> Boiler No. >> Boiler temperature
Menus used:
6.6.2
Empty entry
6.6.2.1
Factory set-
tings
6.6.3
The commands of the KWB Comfort 3 control
6
Boiler
B KWB Easyfire EN, 05.2011
27
To Next Page
Loading...
Need help?
General
