Determine when each buffer tank is to be heated up. You can specify the charging times for
each individual day or for all days together.
If you would not like to use one of the charging times, please set the value for On and Off to
the same point in time: The KWB Comfort 3 will then detect these time periods as an empty
entry.
Times in the buffer program
Charging time From To From To
Monday 8:00 20:00 20:00 20:00
Tuesday 8:00 20:00 20:00 20:00
Wednesday 8:00 20:00 20:00 20:00
Thursday 8:00 20:00 20:00 20:00
Friday 8:00 20:00 20:00 20:00
Saturday 8:00 20:00 20:00 20:00
Sunday 8:00 20:00 20:00 20:00
Buffer temperature
Main menu >> Buffer >> Buffer No. >> Buffer temperature
Actual temperature 1
Water temperature measured on theupper sensor.
Actual temperature 2
Water temperature measured on thelower sensor.
Maximum
The contents are heated up up to this temperature (measured at the lower sensor).
Minimum
The water temperature may drop down to this temperature (measured at the upper sensor); it
is then heated up – unless a consumer requests a higher temperature than the minimum tem-
perature.
Operational state
You can only display values and states via this option, you CANNOT modify these.
Boiler
Main menu >> Operating state >> Boiler
Empty entry
6.7.2.1
Factory set-
tings
6.7.3
6.8
6.8.1
6
The commands of the KWB Comfort 3 control
Operational state
30
B KWB Easyfire EN, 05.2011
To Next Page
Loading...
Need help?
General
