Measured power:
Displays the calculated power in [kW] from the input current.
Energy:
Displays the projected power in [MWh]
Date / Time
Main menu >> Date/Time
Date:
Enter the current date
in the format "DD.MM.YYYY" (2 digits for the day, 2 digits for the month
and 4 digits for the year).
Time:
Enter the current time of day in the format "HH:MM" (2 digits for the hours, 2 digits for the
minutes).
Note: The switchover from summer/winter time occurs automatically!
Pellet suction system
Main menu >> Pellets suction system
Specify a maximum of 2 filling times so that you are NOT disturbed by filling noises during your
resting times.
•
The filling times must be at least 30 minutes long.
• Your input is checked by the software and shortened if necessary.
Preferred time:
Specifies whether the time window is to be used daily or not (Yes|No).
No: (factory setting) Fillings occur on the basis of need whereby blocked times are taken into
account. 30 min before the beginning of the blocked time the system checks whether this can
be bridged with boiler full load: If the heating duration is not specified, the storage container is
filled up till the beginning of the blocked time.
Yes: feedings occur independently of the degree of filling with priority within the current
time window. Select this option if the filling in due time is not ensured due to poor trickling
behaviour or increased fine content.
6.9
6.10
6
The commands of the KWB Comfort 3 control
Date / Time
38
B KWB Easyfire EN, 05.2011
To Next Page
Loading...
Need help?
General
