KWB Easyfire User Manual

Buffer
For
Main menu >> Operating state >> Buffer >> Buffer No.
select a group
for which a buffer tank is specified, the following display appears:
For
Main menu >> Operating state >> Buffer >> Buffer No.
select the "Buffer 0", the following display appears:
For
Main menu >> Operating state >> Buffer >> Buffer No.
select a group
for which no buffer tank is specified, the following display appears:
Note: The header always shows the current buffer program.
Temperature 1
Displays the temperature measured above in the buffer tank.
Temperature 2
Displays the temperature measured below in the buffer tank.
Temperature 3
Optional display, only for Buffer 0: Displays the temperature measured in the middle in the buf-
fer tank.
Temperature:
Displays the available temperature for the consumers of this group (measured in the forward
flow).
Temperature setpoint
Displays the specified maximum temperature or the highest request at the group.
6.8.4
Buffer
Buffer 0
Buffer group
6
The commands of the KWB Comfort 3 control
Operational state
34
B KWB Easyfire EN, 05.2011

KWB Easyfire Specifications

General

Fuel Type	Wood pellets
Cleaning System	Automatic heat exchanger cleaning
Emission Class	5
Nominal Heat Output	10 kW
Type	Pellet heating system
Ash Removal	Automatic
Heating capacity	10 kW
Hopper capacity	15 kg
Flue diameter	130 mm